2 Easy & Fast Ways To Increase Hose Pipe Pressure

Water is a must when cleaning anything in your house. So every house has faucets and water supply pipes that run through every room of the house. But what happens when you need water outside your home? You may need a water source outside of your home for a variety of reasons that a bucket cannot fulfill. Gardening and cleaning large areas are some of the reasons why you should get outdoor faucets. And above all, a hose pipe turned out to be the perfect solution for outdoor water supply. But sometimes a hose can stop having good pressure to make your work outside easier.

Are you just focused on increasing the water pressure inside the house? Well, that could be because your hose is working well and you don’t need that much water outside. And it may also be because you have no idea that it can be done or how to do it. Whatever questions you have about increasing hose line pressure, this article answers them with an essential guide on how to improve hose line pressure.

Fortunately, increasing hose pressure is easy; most of the time, the reason for the low pressure is in the hose line. And other times, it may require a little push with a nozzle or pressure booster to get it to full power.

How to increase hose line pressure

There are two main methods of hose pressure increase, and from what I have already said, you may be able to infer it. The first method is to check the hose for possible problems such as leaks, and the second is by increasing the pressure of the hose using specific tools. This is a step-by-step guide through the process of increasing the water pressure in the hose line:

Method One: Inspect and correct hose problems

You should try this method first before moving on to the next one. Then, if you can find a problem with the hose, you probably won’t need to increase the water pressure.

  1. Inspect the hose for leaks

If your hose was working fine before with reasonably good water pressure and suddenly dropped, a leaky hose could be the problem. It is one of the most common problems with hose lines, ultimately resulting in low water pressure. To find out if this is your problem, lay the hose flat on the ground while the water supply is turned on. Then inspect it carefully for any spots where the pipe might be leaking; keep in mind that leaks can come from tiny holes and you may not see them by looking up and down the pipe, so get down and look closely. If you notice a leak, repair it immediately with a rubber patch kit.

Inspect the hose for leaks

  1. Confirm hose connection to nozzle and nozzle

An error in the hose connection can lead to low water pressure. First, check the nozzle for leaks in its connection. Next, move on to the connection between the hose and the faucet. If you find leaks or loose connections, tighten them immediately.

Inspect other connections your hose may be attached to, such as manifolds, and tighten them. Also, turn off the water supply and loosen the nozzle and nozzle, then screw them back; this will help reduce blockages or accumulations in the hose and reaffirms the status of their connection. However, if the spigot is corroded, this technique will be ineffective and you will need to purchase a replacement to restore the water pressure to normal.

  1. Check the main water valve

This may seem like a normal thing, but sometimes the water pressure does not reach full force if the valve is not fully opened. It is a mistake that is often made when turning on the faucet. So check that the main water valve is turned on properly before jumping to conclusions.

  1. Make sure there are no kinks in the hose

A twisted hose will resist the free flow of water; this can happen while using it. So if the water pressure drops during use, stop working, check the length of the hose for any spots or kinks and smooth them out. If the hose is wound on a reel, check that it is wound correctly and straighten any bends.

  1. Clean the hose

Clean the hose

Sometimes dirt build-up reduces the water pressure in the hose, causing water suppression. So if you’ve taken all the steps above and your water pressure isn’t improving, it should clean the hose line. To do this, take a bucket of water and add 1/4 cup of bleach. Next, coil the hose and submerge it in the bucket of water; leave it there for up to 8 hours. After the time is up, submerge it in plain water for another hour. Then take it out and put it back in its place.

Pro tip: Do this every year in early spring to remove all the dirt that has built up in the hose from sitting idle over the winter.

Method two: Improve the water pressure in the hose

This method is for those who have completed the first and have made no progress in solving the water pressure problem, or those who are sure that they have met all the requirements of the previous steps. Are you in this category? Then let’s find out what other alternatives you have.

  1. Measure the water pressure

Use a test gauge to measure the current water pressure in your home. You can get a test gauge from any hardware store near you. First, turn everything off water taps in your home, then locate the main water supply. After that, attach a pressure gauge to the nozzle on the main water supply and turn the nozzle valve counterclockwise. After doing this, check the reading on the pressure gauge to find out the water pressure measurement.

Home water pressure typically ranges from 40 to 60 psi, with an optimal range of 45 to 55 psi. If the water pressure in the household is below this threshold, then this is the root of the problem with the hose.

  1. Increase the water pressure

Increase the water pressure

Once you’ve diagnosed the problem, the next thing to do is work to fix it. One of the ways to do this is by adjusting the water pressure control valve. A pressure reducing valve (PRV) on the main water supply, which is located near the water meter, regulates the water supply to your home. You can use a wrench to increase the water pressure by turning the PRV screw clockwise. As you turn, constantly check that you have increased the pressure enough; keep turning until you reach the desired pressure.

Pro Tip: Instead of screws, some PVIs have screws so you can use a screwdriver instead of a wrench. Also, do not increase the water pressure more than 60 psi, as the water pipes cannot tolerate much pressure.

  1. Increase the water pressure with a high power nozzle

If after checking the water pressure level, you find that it is normal, there are other ways to increase the pressure in the hose line. An effective method is to use a high power nozzle to significantly increase water production. You can get one from any hardware store near you.

  1. Install a water pump

A water pump is a safe alternative to a powered nozzle. Install the pump in the end of the hose pipe and plug it into an outlet. The pump automatically determines a more substantial water pressure. You can also install a water pump in your main water supply to increase the overall water pressure in your home.

Pro tip: Water pumps differ in price depending on their types; check out the varieties and find the one that suits you best.

Install a water pump

  1. Change the hose pipe size

A shorter and wider hose will increase the water pressure as there will be no resistance unless the water has to flow through a hose long. For example, if the initial water pressure at your outdoor faucet is 30 PSI when the pressure reaches the end of the hose, it will be reduced to 17 PSI using 100 ft of 1/2′′ pipe. Also, there will be 29 PSI at the end of a hose that is 50 feet long and 3/4′′ wide, about a 60% increase in pressure.

  1. A plumber is calling

If you have tried all the methods and steps above and none of them worked, we recommend that you contact an installer to help you fix the problem. After all, your household Water supply system may have some problems, which explains the low water pressure in the hose line. An expert’s advice will also be helpful to avoid such problems again in the future.

Conclusion

Low water pressure makes tasks less comfortable and more demanding. It is often thought that the only major fixes have to do with the water supply inside the home. However, until you need it, you may not appreciate the need for good water pressure in your outdoor faucet and hose pipe.

However, as mentioned earlier, fixing this can be minor and just require looking in the right places, checking for leaks and ensuring firm connections. However, if you are not very lucky, you may need to use some tools to help increase the water pressure. And in extreme cases, you may need to call and have a plumber look into the problem for you. Either way, fixing the pressure of a hose line is well worth the sweat.