The installation of photovoltaic solar panels it allows us to improve both residential and industrial self-consumption. In the same way, it brings us closer to an energy independence that is becoming more and more attractive. The fact of take advantage of solar energy enables homes and businesses to benefit from significant energy savings, contributing to a more sustainable world.
The decision to bet on solar energy can be supported by economic reasonsthat consumption savings or an investmentas well as in ethical issues or commitment to clean energy and the environment. Whatever the motivation, you have the support of a team of experienced professionals who will help you make your decision a success.
[boton-cta]
If you want to know what it\’s like the process of installing solar panels in a home or business we invite you to continue reading.
project study
When an installation request is received and before proceeding with the design of the installation, the technicians carrying out a study of the project in which they are evaluated property possibilities as well as energy needs.
How many solar panels do I need?
Once the estimated consumption has been analyzed and after the installation options are evaluated, a installation project. A professional design will allow you to achieve maximum use of solar radiationat the same time that it will facilitate the optimal performance of the boards and will contribute to a good general maintenance of the system.
The study carried out by the technicians includes revision of the roof that will receive the installation. He coverage, orientation, shadows and surface are essential when approaching a project to install solar energy in homes and businesses.
project design
In her designing a solar panel installation, the tilt and south orientation of the solar panels is essential. The layout of the plates directly affects the amount of energy the system will produce, therefore a good design will allow a better use.
When you close a design you must guarantees the best conditions not only for installationbut also for conservation and sustainability not just the panels, but the entire deck. You must guarantee waterproofing and roof maintenance in perfect condition.
Legalization of the installation
Before proceeding with the installation of tiles, it is necessary to do a reviewing documentation and following municipal procedures and ordinances. Only then can we enjoy appropriate state or regional aid or subsidies. It should be noted that for the work to be legalize must be registered and validated in the council and this requires an authorized installer, such as P.O.W. In addition, we will help you in processing and application relevant helpas well as in communication with the energy distribution company for compensation of the surplus.
Placing the tiles
At this point it is vital the experience of solar panel installers as it is necessary to guarantee optimal operation and best possible performance. There must be a professional team to carry out the installation according to the set design. The objectives pursued in mounting the panels are the best possible use of solar radiation, but also a security in the complementary elements of the platesthat batteries or inverters. An insurance company will insure you compliance with legal regulations and will monitor access to the facility for authorized persons only.
Step 1. Structure and supports
Form fixing the supports to the roof It is determined by its typology and design. A flat roof is not the same as a pitched or gable roof. The project of professionals establishes inclination and orientation of plates, as well as the number of panels to be assembled. The correct fixing of supports and their assembly will be essential to ensure Security and longer life of the structure.
Step 2. Fixing and connecting the solar panels
Solar panels don\’t just have to be connected to the structure, they have to be connected to each other. Finally, the panels connect with the inverter which is the component that converts the direct current produced by the panels into conventional 110v current.
[boton-cta]
Step 3. Wiring and connecting to mains or batteries
The design electrical wiring will be done in an efficient manner and will allow the transport of energy from the plates to the batteries or the network. All components of a solar photovoltaic installation must be connected correctly for which a perfectly distributed network is required. When assembling the battery system it is very important to have defined storage capacity and installed photovoltaic field. There are different possibilities when connecting batteries together, so you need to be extra careful to get the best results.
Step 4. Cleaning and maintenance of the installation
To be able to enjoy the advantages of the new installation, it is necessary to do a correct maintenance and cleaning Of the same. Some care that provides the best performance of photovoltaic panels.A secure installation is an efficient installation, which meets the requirements set by the administration in terms of licenses and urban regulations. That is why we insist again on the need to do it with professionals. Only then will we enjoy the peace of mind of a quality installation with the guarantee of a quick return on investment. consult with P.O.W all the possibilities offered by our self-consumption solutions.
